Speedometer Not Submitted

How to customize the mod settings

To customize the mod you will need a trovesaurus account and a little time, it's pretty straight forward

With the customization of the mod you are able to configure the x, y coordinates of where the mod is drawn so it's not drawn under the hotbar or above it. Because of different resolutions and scale settings users might have the position incorrect. I can't figure out a good way to automatically set it.

Here are the variables you can adjust

position - should be an offset to the y axis if not using the absolute variable

absoluteY - set the absolute y axis coordinates

absoluteX - set the absolute x axis coordinates

e.g "absoluteY=400;absoluteX=100;"

Just follow the instructions below

1. Go to https://www.trovesaurus.com/tools/language.php?file=prefabs_test
2. Find the row with "$totem_test_key_description"
3. Click the edit button, and type in as an example "position=50;" you may also put a negative value like so "position=-50;" positive value should lower it and negative should bring it up.
4. After the changes are done simply click "Download Modified prefabs_test.binfab" and you will need to place this file in the folder "Trove/live/languages/en/override"
5. The override folder may not exist, so you will need to create it beforehand
6. The location of the trove folder depends on where you installed it
7. Note that you will need to restart Trove for the changes to be loaded.

You may also try using the /uiscale command e.g /uiscale 0.9